Sweep & inspection
Caps & crowns
Flue relining
Masonry repair
Gas fireplace serviceLevel 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Olympia Chimney Chimney Sweep in Miami: What to Know First
An Olympia Chimney chimney sweep in Miami typically runs $189 to $329 for a standard open-hearth fireplace, and most jobs are finished in 90 minutes or less from the time our tech wheels the vacuum through your door. We’re an independent Olympia Chimney service provider, which means we work on Olympia products every week but we don’t answer to their warranty department or their pricing schedule. If you own an Olympia fireplace or Olympia-branded chimney system and you’re seeing soot buildup, a lazy flame, or that sharp creosote smell when the humidity spikes, call (786) 305-7861 and we’ll give you a written price before any work starts.
This page is for Miami homeowners who already own Olympia Chimney equipment and want a sweep crew that actually knows the brand, not a generic chimney company that treats every firebox the same. Hank Delano and our crew have pulled apart enough Olympia units in Coral Gables, Shenandoah, and over on Brickell to know exactly where these systems hold creosote and where they fail first.
Key Takeaways
- Standard Olympia Chimney sweep in Miami: $189 – $329, same-day booking usually available
- We’re independent, not factory-authorized: that means honest parts advice, no warranty games
- Every job gets a written price and a 365-Day Done Right Promise on any repair work
- Olympia units have a specific creosote trap we check on every sweep, the smoke shelf and damper housing assembly
- Call (786) 305-7861 for a free estimate, live person answers 24/7
How Olympia Chimney Products Fail, and How We Fix Them
Olympia Chimney builds solid mid-range masonry and prefab fireplace components. That said, every brand has its weak points, and Olympia’s show up in predictable places when you’re doing chimney sweep work in a coastal climate like Miami’s. Here’s what we actually find on the job:
- Creosote packing at the smoke shelf on Olympia masonry fireboxes. Olympia’s angled smoke shelf design does its job, but in Miami’s humidity, creosote doesn’t just flake off, it turns sticky and clings. We see Stage 2 creosote packed a half-inch thick on the shelf and the damper throat. Our sweep protocol on Olympia units includes a dedicated shelf scrape and vacuum pass, not just a wire brush up the flue.
- Damper housing warping from salt air on Olympia cast-iron dampers. Near the coast, Olympia’s cast damper plates and frames rust and bind. A damper that won’t fully open or close changes the draft, which means soot backs up into the house during a sweep. We inspect every Olympia damper for smooth travel before we start brushing, and we’ll tell you plainly if replacement is needed or if it can wait another season.
- Prefab chimney pipe joint separation on Olympia double-wall air-cooled systems. Olympia’s air-cooled chimney pipe uses twist-lock connections. Miami’s heat-and-rain cycle expands and contracts those joints, and after a few years they can work loose. A loose joint lets creosote dust escape into the chase during sweep and it’s a fire-path risk. When we see this, we document it, show you the photos, and quote the resecure as part of the sweep or as a follow-up repair.
- Rain cap and spark arrestor clogging on Olympia termination caps. Olympia’s standard caps have a fine mesh that does a great job keeping critters out and a terrible job staying clear when Miami’s afternoon thunderstorms mix with soot. We find caps fully matted over with wet creosote and leaf debris. That blockage is why some Olympia owners get smoke rolling back into the living room even when the flue itself is clean. Every sweep includes cap and mesh cleaning.
- Firebrick spalling or cracked refractory panels on Olympia masonry zero-clearance fireplaces. Miami’s humidity soaks into the refractory panels, and the heat cycle of occasional fireplace use causes surface spalling, little chips and flakes. It’s not urgent in most cases, and we’ll photograph it and tell you whether to watch it or act now. We don’t upsell panel replacement on a routine sweep unless the damage is structural.
Those last two, the cap clog and the damper binding, are things Olympia’s own literature barely mentions, because they’re climate failures, not manufacturing defects. Miami’s salt air and 75 percent average humidity change how these units wear.
Styles & brands we work with





Our Olympia Chimney Chimney Sweep Process
Here’s the sequence on a typical Olympia Chimney sweep call, from first ring to the invoice you sign:
- 1
Call and price. You call (786) 305-7861, a live person answers, and we ask the right questions: what kind of Olympia unit you have, when it was last swept, and whether you’ve noticed smoke or smell. We give you a written price range before the truck rolls.
- 2
Arrival and floor protection. Our uniformed tech shows up in the window we quoted, lays down drop cloths, sets up the HEPA vacuum, and walks the area with you. No shoes-on-carpet surprises.
- 3
Visual inspection first. Before we brush anything, we inspect the firebox, damper, smoke shelf, and the visible flue. On Olympia units, we’re specifically looking at that damper plate travel and the refractory panel condition, two things we know wear differently here.
- 4
The sweep itself. We run brushes sized to your flue diameter, and on Olympia prefab pipe we check joint integrity as we go. The vacuum runs the entire time, and we’re removing creosote, soot, and any debris from the cap down to the firebox floor.
- 5
Post-sweep report and photos. You see what we saw. If there’s anything beyond basic soot, we show you photos, tell you what it costs to fix, and what can wait. Tell me what you saw, I’ll tell you what it costs.
- 6
Cleanup, written invoice, and guarantee. We leave the hearth cleaner than we found it, hand you a written price that matches what we quoted, and log your sweep date. Any repair we make carries a written one-year guarantee.
What Olympia Chimney Chimney Sweep Costs in Miami
Here’s the straight pricing. A standard Olympia Chimney sweep on an open-hearth fireplace runs $189 to $249. If your Olympia unit hasn’t been swept in five-plus years or you’re burning unseasoned wood, heavy creosote removal pushes that to $269 to $329. Adding a Level 2 inspection, which we recommend before buying any Miami home with an Olympia fireplace, runs $200 to $300 on top of the sweep cost.
What moves the price: flue height, heavy Stage 3 creosote (the glossy tar-like stuff), a damper that needs freeing up, or a cap fully matted over. None of that is hidden. You get the written number before we start, and the invoice shows the same number when we finish.
If we find something broken that needs a repair, we quote it separately, in writing, and you approve it or you don’t. No pressure. A simple damper plate replacement on an Olympia unit might add $80 to $140 in parts and labor, and we’ll show you the old part before it goes in the scrap bin.
Want an exact number for your specific Olympia Chimney setup? Call (786) 305-7861 and we’ll quote it over the phone.
See the difference
Before
After
Before
After
Before
AfterWhy Miami Homeowners Call Flint Chimney Co Miami for Olympia Chimney Work
We operate under The Garrison Standard, the same operating code every Garrison Partners location follows. That means three things on every Olympia Chimney job: a written price before we start, background-checked uniformed techs on-site, and a written guarantee on any repair valid for one full year from the service date. If a covered repair fails inside that year, we come back and fix it at no charge. That’s the 365-Day Done Right Promise, and it’s not a marketing line, it’s printed on your invoice.
We’ve been doing this since 2002 as part of the Garrison Partners family of independently owned chimney companies. In Miami, that matters because so many Olympia Chimney units end up needing parts from other trade brands, DuraFlex liners, HeatShield resurfacing, Gelco refractory products, and we stock and work with all of them. When your Olympia unit needs a liner or a panel that isn’t worth waiting on from the OEM, we’ll tell you the trade-off in plain words and give you options with names you can look up yourself. You’re never locked into one brand’s price list.
Hank Delano and our crew have been serving Miami for years, from Coral Gables to Brickell, and we’ve seen the specific ways Olympia Chimney products wear in this climate. You’ll get straight talk about what’s urgent, what can wait, and what it costs.
FAQs
Once a year if you burn fires regularly, and every two years minimum even with light use. Miami’s humidity makes creosote stickier and caps clog faster than in drier climates. If you notice a sharp, smoky smell when the AC kicks on, call (786) 305-7861 and we’ll take a look.
No. Proper sweeping with tools sized to your flue is part of routine maintenance and won’t void an Olympia Chimney warranty. We use brushes and rods appropriate for your exact flue dimensions and we take photos before and after, so you have documentation if you ever need it. We’re an independent Olympia Chimney service provider, not factory-authorized, so our documentation stands on its own.
You’ll know after the sweep. We inspect, photograph, and show you what we found before recommending any repair. Light soot and minor creosote: sweep and done. Cracked refractory panels, a warped damper, or a loose pipe joint: we’ll show you photos, give you a written price, and tell you if it’s safe to wait. If it can wait, we’ll say so.
We’ll quote you OEM Olympia parts when they’re the right call, and quality aftermarket options from trade brands like DuraFlex, HeatShield, and Gelco when they offer equal performance at a better price. You’ll see the brand names in writing and you decide. We never install a part we wouldn’t put in our own homes.
Most weeks, we can book you within a few days, and a live person answers the phone 24/7 to get you scheduled. We don’t do two-hour emergency windows because a sweep is a planned job, but we’ll give you an arrival window and hit it. Call (786) 305-7861 for current availability and a free estimate.
Schedule Your Olympia Chimney Sweep in Miami
If you own an Olympia Chimney fireplace and it’s been more than a year since the last sweep, call (786) 305-7861. You’ll get a live person, a straight answer on price, and a written quote before we touch a single tool. We serve Miami and nearby areas, work on Olympia Chimney equipment every week, and stand behind every repair with a written one-year guarantee. Tell me what you saw, I’ll tell you what it costs.
Written by Hank Delano, Owner, Flint Chimney Co Miami at Flint Chimney Co Miami, serving Miami and nearby areas.